manualshive.com logo in svg

Hunter ACC2, Быстрый старт

Поделиться
Скачать
Hunter ACC2 Скачать руководство пользователя страница 29

 

Built on Innovation

®

 

29

Diagnostics Menu

Diagnostics Menu

Attention messages do not interfere with normal automatic 
irrigation. 

All attention messages in the Home screen create logs. The 
first step to understanding any problem or message is to 
click the soft key for View Logs, or access the logs from the 
Diagnostics menu. 

Other helpful tools are also located at Diagnostics. Decoder 
controllers include separate diagnostics for decoder 
conditions in the Decoder menu.

VIEW LOGS

There are three types of logs, and a filter function to narrow 
the number of logs displayed.

ALARM LOGS

The controller will store up to 250 alarm logs, with date and 
time, beginning with the most recent alarm. Use the dial to 
advance forward and backward through the alarm list. 

CONTROLLER LOGS 

Other significant messages that are not technically alarms are 
stored in the controller logs (up to 250 events). They are also 
arranged by date and time, with the most recent log first.

Содержание ACC2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды