background image

12

45013-01  •  01/28/10  •  Hunter Fan Company

Installing the Glass Bowl

7-8.  First install B10 candelabra bulbs (60 Watt Maximum) into the  

sockets. 

7-9.  If the fandangle is attached to the extra pull chain, remove it now.
7-10.  Attach the extra pull chain (included) to the fan pull chain using 

the plastic breakaway connector. (You may find the plastic 
breakaway connector on the end of the extra chain.)

7-11.  Thread the fan pull chain through the hole in the metal disc. Then, 

thread the fan pull chain through the hole in the center of the glass 
bowl.

7-12.  Thread the light pull chain through the hole in the center of the 

glass bowl. Then, Thread the light pull chain through the hole in 
the center of the cover plate.

7-13.  Thread the fan pull chain through the grommet hole in the side of 

the cover plate.

7-14.  Place the cover plate up against the 

glass bowl. Align the holes in the cover 
plate and glass bowl.

7-15.  Thread the light pull chain through 

the finial and screw the finial onto the 
threaded rod end until tight.

7-16.  Reattach the fandangle to the extra pull 

chain.

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Breakaway 

Connector

Light Bulb 

Sockets 

 

(B10 

Candelabra- 

Based 60 Watt 

Maximum)

Metal Rod

Metal Disc

Glass Bowl

Cover Plate

Finial

Содержание 45013-01
















Отзывы: