Hunter 44459, Руководство пользователя

Страница: 16 / 40

PAGE 16
16-17 PROGRAMMING
Remove the mylar label covering the LCD display window before operating thermostat.
Setting Time and Day
HOUR
MIN
DAY
RETURN
EXAMPLE:
Set the
thermostat
to the
current time
of 9:43 a.m.
on
Saturday.
Refer to
Figure at
right.
■
During time and day setting mode, the temperature and program
displays will go blank.
■ Press and hold to rapid advance to the current hour. Tap to advance one
hour at a time. Note the AM / PM indicator, as the display will cycle
through 24 hours.
■ Press and hold to rapid advance to the current minute. Tap to advance
one minute at a time.
■
Tap to advance one day at a time.
■
When finished, press to return to the Normal time and temperature
display or wait 15 seconds for it to return to Normal mode automatically.
■ Initial display after power-up or reset. The LCD will show the information
when batteries are first installed, or after the Reset button is pressed. The
temperature will update after a few seconds.
M T W Th F Sa Su
AUTO COOL HEAT TEMP
1 2 : 0 0
SET TEMP
°
C
H
°
C
H
AM
PM
72
M T W Th F Sa Su
AUTO COOL HEAT TEMP
8 9 : 4 3
SET TEMP
° C
H
° C
H
AM
PM
88
M T W Th F Sa Su
AUTO COOL HEAT TEMP
8 9 : 4 3
SET TEMP
°
C
H
° C
H
AM
PM
7 1
B99A p1-19 2/7/03 9:58 AM Page 16