Hunter 21403, Инструкция по установке и эксплуатации

Страница: 13 / 17

12
Hunter Fan Company 41869-01 • 03/12/04
13
41869-01 • 03/12/04 Hunter Fan Company
e wall control is optional. You can intall it in addition to using the
remote transmitter, but you do not need to install both in order for the
fan to work.
9-1. Turn circuit breaker to the fan wall switch OFF.
9-2. Remove the wall plate and switch.
9-3. With the “Up” arrow in the wall control back cover facing up,
connect each of the 2 household black wires to each of the 2 black
wall control wall box assembly wires with wire nuts. e order is
not important. Connect the ground wire from the wall control to
the ground wire in the wall.
9-4. Install the wall box assembly with screws.
9-5. Attach the wall plate to the control wall box assembly with screws.
Note: You may need a different wall plate to match your decor,
or because you have a multigang switch. If so, you can purchase a
Decora®-style switch plate at your local home center or hardware
store. Decora® is a regsitered trademark of Leviton Manufacturing
Corporation.
9-6. Make sure that the dip switches on the back of the keypad
assembly are set to match the appropriate jumper switches (1 on
the dip switches should match 1 on jumper switches, etc.)
9-7. Install the provided 12V battery into the keypad assembly.
9-8. Press and snap the keypad assembly onto the wall plate/wall box
assembly.
9-9. Turn the circuit breaker back on.
9-10. To operate fan and light, push the on/off switch to the up position
and press the desired button on the wall control keypad.
9 • Installing the Wall Control
Steps 9-1 – 9-4
Steps 9-5 – 9-8
Wire Nut