（
2
）
A
Charging hole
1
Start switch
A
Important Information 12
1: Before using the bike for the first time locate the plugs on the right hand side of the handlebars as
per image 1 below. Ensure these plugs are connected together.
2: Charging Information.
Refer to image 2 below. Round charge port located on right side of bike is indicated with an arrow.
3: Add the Batteries (NOT PROVIDED) of dashboard
a. With a screwdriver remove the screw on the dashboard cover located in the center of
the steering wheel.
b. Remove the dashboard cover from the top of the battery compartment.
c. Insert two AA batteries in their correct polarities.
d. Place the dashboard cover over the battery compartment and fasten with the screw
you removed in step one.
4: Operating Instructions.
Start/Go switch is located on right hand handle. To operate press this button. To stop release the button.
AA1.5V
AA1.5V
Horn
Engine sounds
