3. Checking motor direction
3.1. Put motor in program mode
Press
the
open
button.
The blind will jog 1x
2.6
Release
the
manual control button
.
2.7
Press and hold
the
stop
button for 6 seconds.
Keep pressing until the remote lights stop blinking
The remote will exit programming mode
automatically after 20 seconds.
IMPORTANT
Reversing motor direction is only possible with a fresh out of the box motor (no limits set) or when the end limits are
Before any limits are programmed, the motor direction has to be checked and reversed if needed.
If the top or bottom limit is already set, and the motor direction has to be reversed, perform a
before continuing.
IMPORTANT
Watch out to perform steps 3.1.1 and 3.1.2 within 3 seconds!
MANUAL
Page 6 of 22
version: 1.1
