Hunter Douglas Applause, Установка Эксплуатация Уход

Страница: 6 / 40

INSTALLATION
4
Mount the Installation Brackets — Inside Mount
■ ■
Measure 2" from each jamb for bracket location.
■ ➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■ ■
Center the brackets on your marks and mark the location of the screw holes.
■ ➤
The minimum casement depth for mounting the installation brackets is
1
⁄
2
". With
shallow casement depths, mark both of the winged screw holes.
■ ➤
The minimum casement depth for a fully recessed mount is 2
1
⁄
4
" for
3
⁄
8
" and
3
⁄
4
" pleat
sizes and 3" for the 1
1
⁄
4
" pleat size. Mark the center screw hole when depth permits.
IMPORTANT: The front edges of the brackets must be level and aligned to each other.
■ ■
Drill the screw holes using a
3
∕
32
" drill bit.
CAUTION: Use drywall anchors when mounting into drywall.
■ ■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
■ ■
Attach the installation brackets using the screws provided.
Proceed to “Install the Shade” on page 8.
Minimum
1
∕
2
"
Use Center Hole
When Depth Permits
2" Space Evenly
Jamb Jamb
Space Evenly 2"