Woodcliff Side Table
WDC-WOO-STBL
Assembly Instructions
Step 1: Remove protective wrapping and lay all parts on floor. Identify all parts packed in carton
against attached parts list to be sure all parts are present.
Step 2: Lay top (A) upside down on floor, so bottom is facing up. Place soft protective material on
floor before placing top of table face down on floor.
Step 4: Make sure all bolts are aligned properly before tightening. After making sure bolts are tight
and secure, cap bolt covers over bolts. Carefully turn the table over onto its legs (with second
person's assistance if needed). Be sure table legs rest on flat surface.
Step 3: Then attach table legs (B) to the bottom as shown in Image 1, using Bolt(E) and Washer (F)
and Bolt Cover(G). Attach Stretcher(C) to Leg (B) using Bolt (D) and Washer (F) and Bolt Cover (G) as
shown in Image 2.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY.
Image 1
Image 2
G
D
F
C
A
F
E
G
B
1 of 2
