Hunter Douglas Applause, Установка Эксплуатация Уход

Страница: 17 / 40

CARE
15
Removing the Shade, If Necessary
■ ■
Lower the shade approximately 4".
■ ■
While holding the headrail,
push back on the bottom tab
of the installation bracket to
release the bottom edge of
the headrail.
■ ■
Then roll the back of the
headrail down and out from
the bracket.
Cleaning Procedures
Hunter Douglas Duette
®
and Applause
®
Honeycomb Shades are made of anti-static,
dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following
cleaning options are available.
Dusting
■ ■
Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Vacuuming
CAUTION: Do not vacuum Elan
®
fabrics.
■ ■
For deeper cleaning, vacuum gently with a brush attachment.
Compressed Air/Hair Dryer (Cool Setting)
■ ■
Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.
Spot-Cleaning
CAUTION: Do not spot-clean Alexa, Alexa Metallic
™
, Apollo
™
, Calypso
™
, Commercial, Elan,
Applause Esprit
™
, India Silk, Jardin, Leela, Macon
™
, and all Batiste fabrics.
■ ■
Prepare a solution of warm water and a mild detergent.
■ ■
Dampen a clean cloth in the solution and wring it out.
■ ■
Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.
■ ■
Allow the shade to dry in the completely lowered (or closed) position.
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab