Hunter Douglas Alustra Woven Textures Series Скачать руководство пользователя страница 34

Страница: 34 / 36

CARE

Cleaning Procedures

Hunter Douglas roller shades are made from dust-resistant materials which repel dirt and
dust. The following options are available if your shade needs cleaning.

Dusting

■

Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.

Vacuuming

■

Use a hand-held vacuum with low suction for more thorough dust removal.

Compressed Air/Hair Dryer (Cool Setting)

■

Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off of shades.

Spot-Cleaning

CAUTION:

Do not spot-clean Alustra

Woven Textures

fabrics, Fiji, and Fiji Dimout fabrics.

■

Prepare a solution of warm water and a mild detergent.

■

Dampen a clean cloth in the solution and wring it out.

■

Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.

■

Allow the shade to dry in the completely lowered position.

Содержание Alustra Woven Textures Series





































Результаты поиска

Содержание Alustra Woven Textures Series

Отзывы:

Похожие инструкции для Alustra Woven Textures Series

Бренды по названию

Популярные бренды

Hunter Douglas Alustra Woven Textures Series, Установка Эксплуатация Уход

Результаты поиска

Содержание Alustra Woven Textures Series

Отзывы:

Похожие инструкции для Alustra Woven Textures Series

Бренды по названию

Популярные бренды