INSTALLATION
11
Outside Mount — Cassette Shades
■
Center the cassette over the window opening at the desired height and mark the end of
the cassette.
■
Mark 3
1
⁄
2
" from each end of the cassette for the bracket location.
➤
If more than two installation brackets came with your order, space additional
bracket(s), between the two end brackets and mark their location.
Allow a minimum
of 18" from the motor end for the battery wand. Mount into wood whenever
possible.
■
Center the brackets on your marks,
then mark each of the screw holes.
➤
A minimum 4" flat vertical surface
is required to mount the brackets.
IMPORTANT:
For shades with a
battery wand, place a cassette spacer
block behind each installation bracket
to allow for the extra space needed for
these components.
■
Drill the screw holes using a
3
⁄
32
"
drill bit.
■
Use a level to check that the mounting
surface is level.
■
Attach the installation brackets.
➤
With cassette spacer blocks, use 2" screws provided. If not using cassette spacer
blocks, use 1
1
⁄
2
" screws provided.
WARNING:
Product is heavy. Mount into wood/metal studs or into concrete
with concrete anchors. Drywall anchors are not recommended.
Proceed to “STEP 2 — Install the Shade” on page 17.
Headrail End Marks
Window Opening
Space Evenly
Space Evenly
Minimum 18" For Battery Wand
3½"
3½"
3½"
End of
Cassette
Mark
Cassette
Spacer
Block
