INSTALLATION
4
Mount the Installation Brackets For Standard Shades — Inside Mount
■
The installation brackets are supplied in pairs.
One bracket is used on the clutch side with
the bead chain loop and the other bracket is
used with the rotator side of the shade.
■
The installation brackets are always mounted
so that the inner surfaces face each other, as
shown. The brackets must be mounted so the shade is level when installed.
■
Center the shade in the window and mark the end of the clutch side of the shade.
■
Measure the width of the shade from the clutch to end of the tab.
➤
Starting with the previously made mark, use this measurement to mark the location for
the rotator-side bracket.
■
Place the outside edge of the clutch-side bracket on the fi rst
mark, then mark the location of the screw holes.
➤
The minimum depth required for mounting is 2¾".
■
Place the rotator-side bracket centered on the second mark,
then mark the location of the screw holes.
IMPORTANT:
The front edges of the installation brackets
must be level and aligned to each other.
Inside Mount
Holes
Center
Opening
T-Hook
Clutch
Side
Rotator
Side
Tab
Clutch
Measure width of the shade
from the clutch to the end
of the tab.
Use this measurement
to mark the location
for the rotator-side
bracket.
Previously
Made Mark
Tab
1
2
Clutch-Side
Bracket
Rotator-Side
Bracket
