INSTALLATION
8
Mount the Installation Brackets for Cassette Shades — Outside Mount
■
Determine the bracket locations.
➤
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
■
Measure and mark 2½" in from each end of the headrail.
➤
If more than two installation brackets came with
your order, space additional bracket(s) evenly on
studs, between the two end brackets and mark their
location.
■
Mark the location of the screw holes by centering the
brackets on the previously made marks.
➤
A minimum 4" fl at vertical surface is required to
mount the brackets.
➤
The top of the installation brackets should be at
the desired height. The brackets should be level
and aligned.
IMPORTANT:
The front edges of the installation brackets must be level and aligned to
each other.
■
Using a
3
∕
32
" drill bit, drill holes for the screws.
IMPORTANT:
Use drywall anchors when mounting into drywall. Drywall anchors are not
provided.
■
Check that the mounting surface is level. Shim the brackets if necessary. Shims are not
provided.
■
Attach the installation brackets using the screws provided.
2½"
2½"
Space Evenly
Space Evenly
Headrail End Marks
Window Opening
2½
"
