Hundure HTA-810, Руководство пользователя

Страница: 10 / 24

Safety Precautions
To ensure the maximum reliability of the HTA-810/820/830/840, please follow the guidelines listed
below:
DO’s
z
Always read the safety precautions carefully. Keep this user manual for future reference.
z
When product has been damaged during transit, kindly inform your courier.
z
Install the device in a dry, well-ventilated, chemical-free area.
z
Use only the power supply specified for your device and in compliance with IEC 60950.
Power supply of other electronic devices may look similar, but they may affect your device’s
performance or damage it.
z
Installation of this product must be done by authorized, qualified technicians.
z
If any of the following situations arises, get the product checked by a service personnel:
-
The power cord or plug is damaged.
-
Liquid has penetrated into the equipment.
-
The equipment has been exposed to moisture.
-
The equipment does not work well or you cannot get it work accordingly to the User
Manual.
-
The equipment has been dropped and damaged.
-
The equipment has obvious signs of breakage.
z
When replacement parts are required, be sure that the service technician has used
replacement parts specified by the manufacturer or with same characteristics as original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
z
Use only the metal housing specified / supplied by the manufacturer to ensure compliance
with EN55024 safety requirement.
z
Unplug this product from wall outlet and refer service to qualified service personnel if the
product does not operate normally after following the user manual.
z
After turning off the power, kindly wait 3 sec and above before turning the power on to ensure
that all electric charges are fully discharged.
z
Use only the power cord designated by our dealer to ensure safety and EMC. When used with
other power supply voltage, the power cable will be damaged. Use the standard power plug
and cord set of specified country. Consult your product dealer.
z
Kindly use IEC60950/EN60950/UL60950 compliant Uninterrupted Power Supply only.
Alternative products might damage the device or cause fire and electric shock.
DON’Ts
z
Do not expose the device to extreme temperature, directly under the sun, humid environment,
near chemicals or places with high electromagnetic interferences.
z
Installation of this device near flammable materials is extremely prohibited.
z
Do not alter the device for it will VOID your warranty.
z
Do not place the device in an area with an excessive amount of dirt. Use only clean, dry cloth
to clean the controller.
10