Once the menu times out, the Depth Alarm is enabled and an arrow will remain on-screen which indicates
the depth for which the alarm is adjusted. To further adjust the setting, simply press the UP or DOWN
ARROW.
TripLog
To enable Triplog, press MENU repeatedly until the Triplog
menu is on-screen. The Factory Setting is "Hide" which is
selected. Use the DOWN ARROW to select "Show" and the
Triplog box will appear at the upper left corner of the screen.
Triplog provides four pieces of information: the distance
traveled since the Wide Paramount was poweredup (or reset),
the average speed, the total time elapsed since power-up (or
reset), and the input voltage from your boat's electrical
system.
The time, speed, and distance calculations are useful for
tracking your progress on a trip. The input voltage is useful for
determining the condition of the charging system of the boat.
When used in a portable application or whenever the Wide Paramount is operated from a battery source,
the voltage number can be used to determine battery life. The Wide Paramount will operate at voltages
from 10 to 16 VDC. Voltages in excess of 16 or less than 10 VDC will cause the unit to power off.
Once Triplog is enabled, pressing MENU to bring the Triplog menu on-screen now shows an additional
option, "Reset". By selecting Reset, the timer and distance log resets to 0 and the Triplog will begin to
calculate elapsed time, distance traveled, and average speed from the time of reset.
Triplog can be used with any view, except Wide Side.
To disable Triplog, press the MENU button until the Triplog menu is on-screen. Use the UP ARROW to
select Hide and let the menu time out. The Triplog continues to operate and log time and distance even
when it is not visible on-screen. The Triplog resets at power oft.
Perspective
The Perspective menu is only available when in Contour View. Two options are available: forward and
reverse perspective. Perspective controls the viewpoint of the user when using Contour View. Press
MENU until the Perspective menu is on-screen. Use the UP and DOWN ARROWS to select the
perspective option you desire. In the forward perspective, the information is viewed from a point forward
of and to the right of the boat. In reverse perspective, the information is viewed from a point rear of and to
the right of the boat.
The information displayed is the same for either selection; however, the terrain may dictate which offers a
more helpful view of sonar information.
The Perspective menu will not be available when a view other than the Contour View is in use.
Options
The Options Menu is actually a series of linked menu functions which are used initially to select user
preferences. Once user preferences are selected, it is unlikely that these functions need to be accessed
during the normal operation of the product. The Options menu works differently than other menu functions
in that all of the options must be cycled through in order to return to normal operation. There are twelve
Option menus: Contrast, Units, Fish ID, Numeral Size, Transducer, Display Speed, Menu Timing, Depth
Offset, Speed Offset, Width of Beam, Edit Menus, and Reset.
Press MENU until the Options menu is onscreen. There are two choices, Hide (Factory Setting) and
Show. Use the DOWN ARROW to highlight Show and the first Options menu appears.
Содержание Wide Paramount
Страница 1: ......
