background image

 

 

 

VHF255S DSC MARINE RADIO 

TM366-USA 

25/1 Watt VHF/FM 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

 

OPERATOR WARNING 
 

HUMMIINBIRD requires the radio operator to meet the requirements for 
Radio Frequency Exposure. Unauthorized changes or modifications to 
this equipment may void compliance with ***Rule.Any change or 
modification must be approved in writing by HUMMIINBIRD Corp 

 
This equipment has been tested and licensed to comply with the limits for Class 
D Digital Marine Devices. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This 
equipment can generate or radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to 
radio communications and human body. Never transmit before you make sure 
the antenna is properly located.  
 
This device is only an aid to navigation. Its performance can be affected by many 
factors including equipment failure or defects, environmental condition and 
improper handling or use. It is the user's responsibility to exercise common 
prudence and navigational judgement, and this device should not be relied upon 
as a substitute for such prudence and judgement. Your Radio Ocean VHF radio 
generates and radiates radio frequency (RF) electromagnetic energy (EME). This 
equipment must be installed and operated in accordance with the instructions 
contained in this handbook. Failure to do so can result in personal injury and/or 
product malfunction.

  

 
 
 

 
 

 

Содержание VHF255S-DSC
























Отзывы: