background image

Page 33                

 

 

 

 

 

 

 

                            Page 34 

Select on (on) as desired, this is example, selected on and the screen 
shows the vessel position. 

 
 
 
 
 
 

 

6.7.2.2  TIME display on/off 

 

You can to turn on/off the time displayed at the normal mode  

Select GPS/TIME then SETTINGS, then TIME DISPLAY 

Select ON(on) or OFF(off)as desired, in this example, selected and the 
screen no longer shows the time 

 
 
 

 
 
 
 
6.7.2.3   LOCAL TIME (TIME OFFSET) 

 

You can set the add/subtract value from UTC time to equal to local time. 
When offset value is added, the time will be displayed as LOC instead of 
UTC 
First to set the offset dir or – and then value in ½ hr. step. The 
updated result will be displayed immediately  

 
 
 
 
 
 

6.7.2.4  TIME FORMAT OPTIONS (TIME FORMAT) 

You can choose display time in 12 hr or 24 hr format.. 

 
 
 
 

 
6.7.2.5  COURSE/SPEED DISPLAY OPTIONS (COG/SOG) 

You can enable COG (Course over Ground) and SOG (Speed over Ground) 
displayed on normal mode.  

If the TIME display is turn ON, COG/SOG will be turned off automatically, 
since it share the same bottom line for display. 

 
 
 
 
 
 
 

6.8 

RADIO SETUP  

Under Radio Setup submenu, there are 4 items that user can alter 
settings.  

 
 
 
 
 
 
 

6.8.1 

CHANNEL NAME display and EDITING 

To set a channel name to ON or blank on the first line, Maximum of 
12 characters could be set for channel name, a channel name also 
allows be edited. The ways same as Buddy List edit procedures. 

 
6.8.1.1  CHANNEL NAME display 

Select RADIO SETUP then CH NAME, then CH DISPLAY 

Select ON (on) or OFF (off) as desired, this is example, select on and 
press the 

CH

 knob the screen shows the channel name. 

 
 
 
 
 
 
 

6.8.1.2  CHANNEL NAME EDITING 

Select RADIO SETUP then CH NAME, then CH INFO, press the 

CH

 

knob the screen shows the channel name and EDIT and DELETE. 

 

Select EDIT and press the 

CH

 knob to edit the existing name tag, Input 

the new name over the existing name and press the 

CH

 knob to display 

the YES/NO conformation 

 TIME OFFSET 
>+1.5 Hrs   
12:56am LOC.

 

TIME FORMAT 
>12 Hr.   
  24 Hr. 
12:56am LOC.

 

DISTRESS 
 27º34.1268 N 
 82º55.5587 W 
356º  12.6Kts

 

COG/SOG? 
>ON 
  OFF

 

POS DISPLAY
    ON 
 > OFF

 

>POS DISPLAY 
 TIME DISPLAY 
 TIME OFFSET 
 TIME FORMAT

 

DISTRSS 
 27º34.1268 N 
 82º55.5587 W 
356º  12.6Kts

 

   BACKLIGHT 
  CONTRAST 
  GPS / TIME 
>RADIO SETUP

 

>CH NAME 
  RING VOL 
  BEEP VOL 
  INT SPK

 

   CH NAME 
 >DISPLAY 
   CH INFO 
   

 

   DISPLAY 
 >ON 
   OFF 
   

 

 TIME DISPLAY 
    ON 
 > OFF 

 

    POS DISPLAY 
>TIME DISPLAY 
 TIME OFFSET 
 TIME FORMAT

 

COAST GUARD
  27

0

45.1234N 

112

0

36.5678W 

 

Содержание VHF255S-DSC
























Отзывы: