Humminbird VHF255S-DSC, Руководство пользователя

Страница: 5 / 23

Page 9 Page 10
2.3 HANDSET
① Channel Up/ Down Press and release to change channel.
②
16/9 Press and release 169 button to select channel
16 first; Press 16 key to quit all other modes and
to into the priority channel.
③
Hi/Low: Press and release HI/LO button to toggle
between 25watt power output and 1watt output.
The “HI” or “LO” icon appears on LCD display to
indicate the setting.
④
PTT: Push PTT to enable VHF communication into
transmitter.
.
⑤
DSC/MENU Use this button to enter Menu setup or DSC call
Menu Call Mode is used for making DSC Calls.
Menu Mode is used to setup the radio
2.4 LCD SYMBOL AND MEANINGS
SYMBOL MEANINGS
HI LO Transmission power High (HI) 25W or Low (LO) 1W.
Indicates an incoming DSC call or blank to notify you of any
unread call log messages.
TX Indicate that the radio is Transmitting
RX Indicate that the radio is receiving a radio signal.
M Indicate the current channel has been saved in memory.
Indicate the current work at Memory mode (Channel are selected
at saved channels).
DU TRI Indicate Watch state.
WX Weather channel mode is active. US and Canada
ALT an weather alert is being received. US and Canada
88 Channel selected.
U I C Selected channel bank for VHF radio operations and regulations.
LOCAL
Indicates the radio is in Local reception mode, which decreases
receiver sensitivity in high traffic areas to decrease unwanted
reception
PSCAN Indicate the current work on pri-scan mode.
① ②
③
④
⑤