Humminbird RX AIS, Инструкция по установке и эксплуатации

Страница: 25 / 34

Installation
Page 22
Step 6 - USB Connection (optional)
Figure 11 USB Connection
The AIS receiver is supplied with a USB port for connection to a PC or Mac. The USB connector can be
connected directly to the USB port on the PC or Mac via the supplied USB cable. To enable connection
of the AIS receiver to a PC, use the product CD to install the USB drivers. Driver installation is typically
not required for use with a Mac.
To install the drivers please follow the steps below:
1. Insert the product CD into the PC and navigate to the USB drivers folder.
2. Double click the setup.exe file to launch the installer.
3. Follow the on-screen installation instructions to complete installation.
4. Once installed the AIS unit can be connected to the PC. The USB drivers will be installed
automatically, and the AIS will appear as a new COM port device.