Humminbird RX AIS, Инструкция по установке и эксплуатации

Страница: 23 / 34

Installation
Page 20
are automatically transmitted via the high speed port. This is particularly useful when using a
chartplotter having only a single NMEA 0183 port. As any other sensor (such as a gyro-compass) can
be connected to the AIS receiver via the low speed port, and the AIS receiver can be connected via the
high speed port to the chartplotter resulting in the chartplotter receiving both AIS information and
heading information simultaneously. Configure your equipment to the correct baud rate. The baud
rate is determined by the port you’ve chosen for connection.
Figure 9 Connecting to the NMEA 0183 data port
Tr
Transmit –
Power in +
Power in –
Not used
Not used
R
Receive –
Brown
Blue
Light green
Orange
Red
Black
White
Green
Purple
Pink
Grey
Yellow
Tr
Transmit –
R
Receive –
NMEA 0183
Port 1
38,400baud
(chartplotter)
NMEA 0183
Port 2
4,800baud
(other NMEA 0183 device)