Humminbird RX AIS, Инструкция по установке и эксплуатации

Страница: 21 / 34

Installation
Page 18
Step 3 - Connecting the accessory cable
Figure 8 Position of the Power and Data connector
An accessory cable is supplied with the product to provide connections to power and the NMEA 0183
data ports. The cable has a pre-moulded connector at one end, which should be connected to the
connector on the unit marked 'PWR/DATA'. The other end of the cable has twelve colour coded bare
wires ready for connection. Table 1 lists the function of each colour coded wire for reference.
Wire colour Description Function
Red Power in + Power supply connections
Black Power in -
Light Green Not used No connection
Orange Not used
VHF antenna
Power and data NMEA 2000