manualshive.com logo in svg

Humminbird Matrix 77, Руководство по эксплуатации

Описание: Humminbird Matrix 77 - передовой эхолот, который обеспечивает высокую точность и надежность при рыбной ловле. Для правильной настройки и использования устройства рекомендуется загрузить бесплатное Руководство по эксплуатации с веб-сайта manualshive.com. Оптимизировано для оптимальных результатов на воде.

Поделиться
Скачать
background image

46

45

Depth Offset 

(Advanced)

Depth Offset

will adjust the digital depth readout to indicate depth from the waterline

or boat's keel. Enter a positive vertical measurement from the transducer to the
waterline to read the depth from the waterline. Enter a negative vertical measurement
from the transducer to keel to read the depth from the keel. This menu choice is
available only when in Advanced User Mode (see 

Setup Menu Tab: User Mode.

)

To change the Depth Offset setting:

1.  Make sure you are in Advanced User Mode, then highlight Depth Offset on

the Setup menu.

2.  Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset

setting. (-10.0 to +10.0 feet or -3 to 3 meters

[International Models Only]

,

Default = 0)

Temp Offset 

(Advanced) 

Temp Offset

will adjust the temperature readout by the amount entered. This menu

choice is available only when in Advanced User Mode (see 

Setup Menu Tab: User Mode.

)

To change the Temp Offset setting:

1.  Make sure you are in Advanced User Mode, then highlight Temp Offset on

the Setup menu.

2.  Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

Speed Calibration 

(Advanced, with Temp/Speed Only) 

Speed Calibration

will adjust the speed readout by the percentage entered, and will appear

in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at
least once, when the unit is in Advanced User Mode (see 

Setup Menu Tab: User Mode.

)

To change the Speed Calibration setting:

1.  Make sure you are in Advanced User Mode, then highlight Speed Calibration

on the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed

Calibration setting. (-20% to +20%, Default = 0%)

NMEA Output 

(Advanced) 

NMEA Output

turns the NMEA output on or off. This menu choice is available only

when in Advanced User Mode (see 

Setup Menu Tab: User Mode.

)

The following NMEA sentences are output:

DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date

When navigating, the following NMEA sentences are also output:

APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info

To turn NMEA Output on or off:

1.  Make sure you are in Advanced User Mode, then highlight NMEA Output on

the Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA

Output to On or Off (On, Off, Default = Off).

M77_Man_Eng_531350-1_B.qxd  1/3/2005  4:30 PM  Page 50

Содержание Matrix 77
































Отзывы:

Нет отзывов

Похожие инструкции для Matrix 77

Бренды по названию

Популярные бренды

Загрузить еще бренды