background image

User Mode (Normal or Advanced)

- An Advanced Mode is provided for users who

desire the highest level of control over the Fishing System and Normal Mode for
users who desire greater simplicity and fewer menu choices. Additional Advanced
menu choices will be displayed throughout the menu system when you navigate to
specific menus while in Advanced Mode. Any changes made while in Advanced
Mode will remain in effect after you switch back to Normal Mode. See

Setup Menu

Tab: User Mode 

for specific instructions on changing to Advanced User Mode.

Total Screen Update

- when you change any menu settings that affect the Sonar

View, the view will update immediately (i.e. you don’t have to exit the menu to apply
the change to the screen). 

Sonar Tab, Normal Mode

Sonar Tab, Advanced Mode

18

17

The Menu System

The menu system is divided into easy-to-use menu modules. The main components
of the menu system are:

Start-Up Options Menu -

Press the MENU key during the power up sequence to view

the Start-Up Options menu.

X-Press™ Menu

- The X-Press™ Menu allows you to

access the settings that are changed frequently without
having to navigate through the whole menu system.
Press the MENU key once to display the 
X-Press™ Menu. When you select a menu item from the
X-Press™ Menu, the menu will collapse, leaving only the
menu choice on the screen. Use the UP or DOWN Cursor
keys to reactivate the X-Press™ Menu.

NOTE: 

The X-Press™ Menu choices will vary depending on

which view is active when you press the MENU key, as well as
whether you are in Normal or Advanced User Mode.

Main Menu Tabs 

- Less frequently-adjusted menus are grouped into the Main 

Menu System. The Main Menu system is organized under the following tab headings to
help you find a specific menu item quickly: Alarm, Sonar, Setup, Views, and Accessories.

Press the MENU key twice for the Main Menu, then
use the 4-WAY Cursor LEFT or RIGHT key to select a
tab, and use the DOWN or UP key to select a specific
menu item under that tab, then use the LEFT or RIGHT
keys again to change a menu setting. Press the EXIT
key to move quickly to the top of the tab. A down
arrow at the bottom of a menu means that you can
scroll to additional menu choices using the DOWN
Cursor key. A right or left arrow on a menu choice
means that you can use the RIGHT or LEFT Cursor keys
to make changes or see more information. 

NOTE: 

The Main Menu choices will vary depending on whether you are in Normal or

Advanced User Mode.

Main Menu System

Normal User Mode

X-Press™ Menu

M77_Man_Eng_531350-1_B.qxd  1/3/2005  4:29 PM  Page 22

Содержание Matrix 77
































Отзывы:

Похожие инструкции для Matrix 77