Humminbird 581i Combo Скачать руководство пользователя

Страница: 67 / 109

Waypoint [Name]

(Most recently-created waypoint)

Settings: Edit, Delete, Go To, Target, Grid

Waypoint [Name]

allows you to view the waypoints submenu for the most

recently created waypoint. You must have pressed the MARK key at least once
since you last powered up the Fishfinder for this menu option to appear.

NOTE:

See

Introduction to Navigation

for more information.

The Waypoint Submenu contains the following menu options:

Edit

allows you to edit the Name, Position (Latitude and Longitude), and

select the Icon that will be used to represent the waypoint in the Chart
and Combo Views.

Delete

allows you to delete a waypoint from the saved waypoints list.

Go To

allows you to select a waypoint and start navigation toward that

waypoint, or add that waypoint to the end of the current route.

Target

allows you to apply a target to a waypoint selected from the

saved waypoints list.

Grid

allows you to apply a trolling grid to a waypoint selected from the

saved waypoints list.

Navigation X-Press™ Menu

Содержание 581i Combo














































































































Результаты поиска

Содержание 581i Combo

Отзывы:

Похожие инструкции для 581i Combo

Бренды по названию

Популярные бренды

Humminbird 581i Combo, Руководство по эксплуатации

Результаты поиска

Содержание 581i Combo

Отзывы:

Похожие инструкции для 581i Combo

Бренды по названию

Популярные бренды