82
Local Time Zone
(Advanced)
Local Time Zone
selects your time zone in reference to the time reported by the GPS
receiver when Time+Date is selected as a Digital Readout on the Sonar View (see
Select
Readouts
). This menu choice is available only when in Advanced User Mode (see
Setup
Menu Tab: User Mode
).
To change the Local Time Zone:
1. Make sure you are in Advanced User Mode, then highlight Local Time Zone on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Local Time Zone
(Default = EST [UTC-5] - Eastern Standard Time).
Daylight Saving Time
(Advanced)
Daylight Saving Time
adjusts the time display to account for local Daylight Saving
Time when Time+Date is selected as a Digital Readout on the Sonar View (see
Select
Readouts
). Selecting On adds one hour to the time display adjusted for your local time
zone. Selecting Off leaves the time display as adjusted for your local time zone. This
menu choice is available only when in Advanced User Mode (see
Setup Menu Tab:
User Mode
).
To change the Daylight Saving Time setting:
1. Make sure you are in Advanced User Mode, then highlight Daylight Saving Time
on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn Daylight Saving Time
On or Off. (Off, On, Default = Off)
81
Temp Offset
(Advanced)
Temp Offset
will adjust the temperature readout by the amount entered. This menu
choice is available only when in Advanced User Mode (see
Setup Menu Tab: User Mode
.)
To change the Temp Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the
Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset
setting. (-10.0 to +10.0 degrees, Default = 0)
Speed Calibration
(Advanced, with Temp/Speed only)
Speed Calibration
will adjust the speed readout by the percentage entered, and will
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has
moved at least once, when the unit is in Advanced User Mode (see
Setup Menu Tab:
User Mode
.)
To change the Speed Calibration setting:
1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on
the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Speed
Calibration setting. (-20% to +20%, Default = 0%)
531450-1_A - 383c_Eng.qxd 11/18/2005 2:38 PM Page 88
