Getting to Know Your
H3
8
COMFORT
Seat Adjustment
Manual Seats
Adjust the position of the seat:
Lift the
bar located under the front of the seat
and slide the seat to the desired
position. Release the bar.
Reclining Seatback:
Lift the lever (C)
and move the seatback to the desired
position. Release the lever to lock the
seatback in place.
Power Seats (if equipped)
The power seat control (B) is located on
the outboard side of the seat.
Move the seat forward or rearward:
Move the entire seat control forward
or rearward.
Raise or lower the front or rear of the
seat:
Lift or depress the front edge or
rear edge of the seat control.
Raise or lower the seat:
Lift or depress
the entire seat control.
Manual/Power Lumbar (if equipped)
Manual lumbar support:
The control
knob is located on the outboard side
of the seat. Turn the knob
counterclockwise to increase support
and clockwise to decrease support.
Power lumbar support:
The control
switch (A) is located on the outboard
side of the seat. Press and hold the front
Heated Seats (if equipped)
The seat cushion and the lower back of
the driver’s and front passenger’s seats
can be heated. The controls are located
on the outboard sides of the front seats.
High Setting:
Press the upper part of
the switch.
Low Setting:
Press the lower part of
the switch.
Off:
Put the switch in the center position.
See Section 1 of your Owner Manual.
Note:
The ignition must be turned to On
in order for the heated seats to operate.
Also, the passenger’s safety belt must
be buckled for the passenger’s heated
seat to operate.
Climate Controls
Temperature Control
Turn the temperature control knob (A)
to raise or lower the temperature setting.
(Air Conditioning):
Press the
temperature control knob to turn the
air conditioning system on or off. The
indicator light will flash three times
B
A
C
of the switch to increase support and the
rear of the switch to decrease support.
See Section 1 of your Owner Manual.
Содержание 2008 H3
Страница 19: ...19 Notes...
