9
Passenger Automatic Locking
Restraint (ALR)
The safety belt is designed to lock dur-
ing an accident, but it will also lock if it is
pulled out all the way during initial buck-
ling, and you may be unaware that this
has happened. If the safety belt does
lock, unbuckle it and allow it to retract
fully; then pull it out and rebuckle the
belt.
See Section 1 of your Owner Manual.
Power Lumbar Front Seats
Adjust lumbar support
• Press the front or rear of the control
located on the side of the seat cush-
ion near the door. Release at the pre-
ferred setting.
Adjust wing area of lower seatback
• Press the top or bottom of the lumbar
control. Release at the preferred
setting.
See Section 1 of your Owner Manual.
The driver’s seat
and the outside
rearview mirrors
can be programmed
to recall memory
settings using the
Memory Control
buttons on the
driver’s door.
To store the memory settings:
1. Shift the vehicle into Park.
2. Adjust the driver’s seat, including the
seatback recliner, lumbar and side
wing area.
3. Adjust both outside mirrors.
4. Press and hold the 1 or 2 button of
the memory control for three seconds.
A double chime will sound.
Repeat the procedure for a second
driver and select the other Memory
Control button.
Each time button 1 or 2 is pressed with
the vehicle in Park, the memory settings
will be recalled. To stop recall movement
of the driver’s seat at any time, press
one of the memory buttons or power
seat controls.
See Section 2 of your Owner Manual.
Memory Seat and Mirrors
Hummer H2 2007 A 5/25/06 3:01 PM Page 9
