Getting to Know Your
H2
8
Content Theft-Deterrent System
Arm the System
Lock the doors using the power door
lock switch or the Remote Keyless Entry
transmitter. The
(Security) light on
the instrument cluster will illuminate (or
flash if a door is open) to inform the
driver the system is about to be armed.
After a short period of time with all doors
closed, the Security light will go off,
indicating the system is armed and
functioning.
If the Door Lock Delay setting is turned
on, the system will not be armed until all
doors are closed and the delay timer
has expired.
Using the Driver Information Center, you
can program the alarm to the following:
• Both Horn/Headlamps
• Horn only
• Lamps only
• Off
See Section 2 of your Owner Manual.
Note:
Your vehicle’s factory default
setting is Horn and Lamps. See the
Driver Information section of this booklet
for more information.
COMFORT
Heated Front Seats
This feature allows you to heat the front
seatbacks and seat cushions simultane-
ously or just the seatbacks. The controls
are located on the driver and front pas-
senger door panels.
Select a heat setting for both the
seatback and seat cushion
• Press and release the horizontal but-
ton (A) until the indicator light shows
the desired setting.
Select a heat setting for the seatback only
• Press and release the vertical button
(B) until the indicator light shows the
desired setting.
See Section 1 of your Owner Manual.
B
A
Hummer H2 2007 A 5/25/06 3:01 PM Page 8
