5
Driver Information Center (DIC)
Your steering wheel-mounted DIC
controls offer a variety of functions,
including providing access to trip and
fuel economy information, and vehicle
customization features.
Odometer/Trip Settings
Your vehicle’s odometer/trip settings
operate only when they are turned on.
Press the Trip button ( ) to access
the odometer setting. Continue to press
the Trip button to access the following
trip modes:
• Trip A
• Trip B
• Timer
• Engine Hours
Reset trip information
Press and hold for two seconds
while viewing any of the trip modes on
the Driver Information Center.
Fuel Information
Press the (Fuel Information) button
to scroll through the Fuel Range, Fuel
Used, Average Economy and Engine Oil
Life selections on the Driver Information
Center.
Fuel Range
This mode shows the range in miles that
the vehicle can travel with the current
amount of fuel. The display will show
Low if the fuel level is low.
Fuel Used
This mode shows the current amount
of fuel used in gallons since the last
reset for Fuel Used. This mode should
be reset after every fuel tank fill-up.
Average Economy
This mode shows the average fuel
economy in miles per gallon since the
last reset for Average Economy.
Engine Oil Life
This mode shows the percentage of
oil life left until it is recommended to
change the engine oil. An oil and filter
change should be performed within 600
miles of the Change Oil message being
displayed.
Reset fuel information
While a fuel information mode is
displayed, press and hold for several
seconds. The displayed mode will be
reset.
Vehicle Customization
To scroll through the features that can
be customized using the Driver
Information Center:
1. Press the (Customization) button
located on the steering wheel.
2. Press the (Select) button to
choose your desired setting. The first
setting is the default setting.
3. Press the button to move to the
next feature.
Hummer H2 2007 A 5/25/06 3:01 PM Page 5
