Humboldt Digital MasterLoader HM-3000.3F Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 40

background image

Introduction

Applications

The HM-3000 Series MasterLoader Compression Testing Frame is designed
for applications requiring multi-purpose loading systems. It is ideal
for Geotechnical laboratories, road construction projects, educational
institutions, and start-up laboratories. Its modular design minimizes initial
costs and allows easy upgrades as desired.

Product Use

This product is intended for use only in accordance with the directions
and specifications contained in this User Guide. Your HM-3000 has been
configured according to your specifications.
The HM-3000 Series Digital MasterLoader has been designed for testing that
complies with ASTM D1883, D2850, D2166, D4767, D5581 and D6927 and
AASHTO T193, T296, T297, T208, T245, T246, and applicable International
standards.

Product Description

The HM-3000 Series Digital MasterLoader has been designed to provide
all the basic functions required to carry out soil (CBR, LBR, Unconfined,
Triaxial), Soil-Cement, and Hot Mixed Asphalt (Marshall, TSR) testing in a
single instrument. Your Compression Testing Frame/Master Loader arrives
factory calibrated for the specific tests you requested.

The HM-3000 Series Digital MasterLoader includes the following key
features:

• Control of a stepper motor driven platen at speeds from 0.000001 to

3.000000 in/min (or equivalent 00.000001 to 75.000000 mm/min).

• Support for up to 4 analogue transducer inputs from 0 to 100 mV

suitable for most load, pressure, volume change and displacement
devices. Configuration and calibration capability is provided, and all-
important data is stored in non-volatile memory for safe preservation.

• Complete Data logger capacity for the following tests: Triaxials, CBR,

Marshall/TSR, Unconfined Compression, as well as Soil-Cement
tests. All are fully configurable for automated Start, Stop and Logging
conditions and can hold up to 1000 readings per test.

• A large LCD screen and 9 key membrane panel for easy presentation

of results, parameter configuration, and machine control. To protect
against operator misuse, key parameters can only be changed under
pass code control.

1

«
...
2
3
4
5
6
...
»

Содержание Digital MasterLoader HM-3000.3F









































Отзывы:

Нет отзывов

Похожие инструкции для Digital MasterLoader HM-3000.3F

Бренд: ABB Страницы: 86

Бренд: Walker Bay Страницы: 8

Бренд: NORLUX Страницы: 2

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: ODA Страницы: 103

Бренд: Tascam Страницы: 8

Бренд: B-K lighting Страницы: 5

Бренд: B-K lighting Страницы: 4

Бренд: B-K lighting Страницы: 3

BOMAG BW 100 ADM-5

Бренд: Fayat Страницы: 216

Бренд: B medical systems Страницы: 28

Бренд: Haag-Streit Страницы: 16

Бренд: Nemalux Страницы: 6

Бренд: OBDLink Страницы: 2

Бренд: NARGESA Страницы: 37

Бренд: NARGESA Страницы: 6

Бренд: Ultraflex Страницы: 52

Бренд: Palmgren Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды