Humboldt Digital MasterLoader HM-3000.3F, Руководство по эксплуатации продукта

Страница: 14 / 40

Set Up Key
Pushing the Set Up Key brings up the main set up screen
from which you can run a test, review your last test, access
the engineering set up menus and set the date, time, units,
standards criteria. This key also is used to return to a previous
screen.
Speed Key
Pushing the Speed Key allows you to set the test speeds of the
machine.
Up Key
Pushing the Up Key allows you to move the platen up to
facilitate testing. Also, by pressing and holding down the Up
Key, you can move the platen up at its fastest rate of speed—
3.0"/min. Releasing the Up Key returns the platen to its set
speed. When the key is pushed the green light next to it is lit.
Stop Key
Pushing the Stop Key stops platen movement. When the key is
pushed the red light next to it is lit.
Down Key
Pushing the Down Key allows you to move the platen down.
Also, by pressing and holding down the Down Key, you can
move the platen down at its fastest rate of speed—2.0"/min.
Releasing the Down Key returns the platen to its set speed.
When the key is pushed the green light next to it is lit.
Function Keys
The four function keys are used to navigate through the
HM-3000’s menu-driven display. The function keys
correspond with the command lines on the HM-3000’s menu
display. F1 corresponds with the first command line; F2, the
second, etc. Command lines that are active in any display will
be proceeded by an (*). If no (*) is present, the corresponding
function key is not active.
11
LOAD 1 0001.2 lb
DISP 1 0.003 in
PRES 1 0.1 psi
VOLU 1 0.1 cc
Except when viewing all four channels values as above left, the function
keys will perform a tare function to the displayed value and "T" will be
displayed next to the channel name to indicate that the value of the
channel has a tare (above right).
LOAD 1 T 0000.0 lb
DISP 1 T 0.000 in
PRES 1 T 0.0 psi
VOLU 1 T 0.0 cc