3)
Assemble Posts and 3x10 Headers
With two 6x6 Post [1]
laid flat on the ground measure 7 ½” from the
top edge and mark for the
top of the 3x10 header. Center the pre-drilled holes of 3x10 Header [2] upon post. Ensure equal
92 ½
”
spacing along the length of the posts and use a framing square and bubble level to
maintain square dimensions. Mark hole location and drill holes through posts using 7/8
” drill bit
.
Assemble two 3x10 Headers on both sides of post using provided hardware
Repeat for remaining two posts and 3x10 headers
