28 English
Register other handsets
Mobile sets of other GAP enabled devices can be registered as follows:
At the mobile set:
Start the registration of the mobile set following the respective user
manual.
At the base:
Press registration/paging
button at the base station for five seconds and
release the button again. The LED top right at the base station blinks during the search
mode of the base station.
If you are asked to enter a RC code, kindly enter “
1111
” as registration code.
Deleting a handset from the base station
Should you wish to deregister a mobile set from the base station, proceed as follows:
Press
Menu
(left softkey)
Setup
Press
OK
(left softkey)
Registration
Press
OK
(left softkey)
Delete
Press
OK
(left softkey)
?
appears on the display.
Press
OK
(left softkey)
After a short while the handset returns to the start menu and is now de-registered
from the base.
Dial pause setup
In order to get an exchange line on a telephone system, you can insert a dial pause after
the first digit. The pause can be set between 1 and 6 seconds.
Press
Menu
(left softkey)
Setup
Press
OK
(left softkey)
Network
Press
OK
(left softkey)
Pause
Press
OK
(left softkey)
Use the
buttons to select the desired dial pause (1 to 6 seconds).
Press
OK
(left softkey) to save your settings.
Note:
Press
Back
(right softkey) to return to the menu list.