HumanTechnik flashtel comfort II LB f, Руководство пользователя, Страница: 50 / 172

50 English
Setting the number of cycles
A cycle is defined as dialing all the programmed SOS phone numbers in one consecutive
sequence. By setting the number of cycles you will define how frequently the phone num-
bers are to be dialed.
1. Press the
P button and then the button.
2. Enter the four-digit device PIN “ XXXX ” (the telephone’s default PIN code is “ 0000 ”).
3. Enter the code “ 350 ”.
4. Enter the number of cycles using the number keys 1-8.
If you press 9, the telephone will keep transmitting the SOS call until it is answered.
5. Press the P button to save the changes.
6. Re-enter a code or press the P button to exit the Settings menu.
Note:
The telephone’s default is 3 cycles.
Pause after an unsuccessful cycle
You can specify the pause (1-9 minutes) between the end of an unsuccessful cycle and the
start of a new cycle.
1. Press the
P button and then the button.
2. Enter the four-digit device PIN “ XXXX ” (the telephone’s default PIN code is “ 0000 ”).
3. Enter the code “ 351 ”.
4. Enter the duration of the pause using the number keys 1-9.
5. Press the P button to save the changes.
6. Re-enter a code or press the P button to exit the Settings menu.
Note:
The SOS LED flashes during the pause between cycles and is illuminated constantly during
cycles.