Humanscale TouchPoint T7 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 62

background image

4.1 CART WARNING REVIEW

BATTERY REPLACEMENT

To maintain certification, replace the T7’s battery with a Humanscale replacement battery only.

GROUNDING

Connect the T7 to an equivalent receptacle marked “Hospital Only” or “Hospital Grade” to ensure a
protective earth ground.

SERVICE AND REPLACEMENT

Do not attempt to service the system while the power is on. Do not attempt to service or replace any part
of the T7 unless directed to do so through Humanscale-approved documentation (i.e., this User Manual
or other instructions). Only Humanscale or a Humanscale-certified entity may service or replace the cart
components. If any component on the cart is missing or damaged, the cart must not be used. Contact
Humanscale Customer Service immediately to request service.

DANGEROUS VOLTAGE

Do not remove the base cover—there may be electrical energized components, even when the T7 is

in standby mode. Opening of the base by unauthorized personnel may cause injury and/or death.

If the unit is not working properly, please contact Humanscale at 1-800-400-0625.

T7 SYSTEM WEIGHT LIMITS FOR POWERED CART

Gantry can accommodate accessories weighing up to 11.5kg (25lbs) such as but not limited to flat-panel

(1 or 2) displays, scanners, bottles, etc.

Keyboard

can accommodate accessories of up to 2.25kg (5lbs)

Laptop tray

can accommodate accessories of up to 11.5kg (25lbs)

Storage Drawers

(including optional MedLink, MedProx) weighing up to 30.4kg (67 lbs)

Worksurface

can accommodate total weights of 122lbs (includes accessories on Gantry, Keyboard,

Laptop Tray and any additional accessories)

DO NOT USE THE UNIT IN OR NEAR WATER OR OTHER LIQUIDS.

If the unit becomes wet, power it off immediately by unplugging the AC power cord from the wall,

holding the power button under the back right corner of the work surface (if standing in front

of the cart), and pulling the circuit breaker switch under the left side of the base. Wipe away

any excess liquid and allow it to dry before use.

DO NOT IMMERSE THE POWER SYSTEM IN WATER.

This is an electrical hazard and can cause damage to the unit, as well as injury to the user.

USE A NONFLAMMABLE CLEANER WHEN CLEANING THE UNIT.

Failure to do so can result in death, explosion and/or fire. Always unplug the unit before cleaning.

DO NOT LEAVE THE UNIT UNATTENDED AROUND CHILDREN.

Failure to do so can result in injury and/or death.

31

Return to Table of Contents

«
...
30
31
32
33
34
...
»

Содержание TouchPoint T7































































Отзывы:

Нет отзывов

Похожие инструкции для TouchPoint T7

Бренд: BANLAW Страницы: 32

Бренд: Baker Instrument Company Страницы: 24

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

Бренд: Olympus Страницы: 56

Бренд: Yamaha Страницы: 39

Бренд: Yamaha Страницы: 110

Бренд: Osram Страницы: 4

SpinVessel VP 418SV3-1-850RB-CC

Бренд: V&P Scientific Страницы: 9

MACDON C HARVESTEC 6000

Бренд: CORN Страницы: 24

Бренд: Star Страницы: 16

Бренд: Ametek Страницы: 20

L10 LVELED Series

Бренд: Clevetronics Страницы: 2

Бренд: Goobay Страницы: 20

Бренд: PALAZZANI Страницы: 131

VEX-WPCR Series

Бренд: Exitronix Страницы: 4

ADVANTAGE 78400-117

Бренд: Medivators Страницы: 12

INTIMIDATOR 15XPC

Бренд: Bandit Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды