7142
7142
2.
HumaSens2.0
plus
GL
U 7142
HumaSens2.0
plus
1.
8
Chapter 2
Setting the Meter
Note:
Adjusting the correct time and date is important to help managing your health records.
Selectable units:
“mg/dl” and “mmol/l”
2.3 Code the Meter
Each vial of strips has a code strip to code your meter. Code your meter when you first use it or open a new vial of strips.
With the Auto Strip Identification function, once you code your meter, you do not have to switch the test mode every
time you perform a test.
>
Make sure the
meter is off.
>
Then insert the
code strip into
the test port.
>
The Code number will show on the screen.
Make sure the numbers on screen, code strip,
and strip vial label are the same.
>
Then remove the code strip.
>
appears on the screen for a short moment,
indicating that the meter has been successfully
coded to the respective test mode and test strip lot.
