1.
+
CR2032
2.
3.
7
Chapter 2
Setting the Meter
2.1 Installing/Replacing the Batteries
Please remove the plastic tab under the battery before using. This instrument uses a CR2032 3V lithium battery.
Do not use or install different types of battery. It will damage the meter.
Installing Instructions:
Note:
Dispose the batteries according to your local environmental regulations.
2.2 Set Date, Time and Units
Press “S” button for over three seconds. You will hear one “beep” for entering the setting mode, then follow the
instruction below to set up.
Setting order:
Year/Month/Date/Hour/Minute/Units
>
Click “M” button to advance one unit.
>
Click “S” button to enter next setting and to end setting mode.
>
The meter will turn off automatically after setting.
Slide to remove
the battery lid.
Insert the
battery with
the positive (+)
side up.
Slide back the
battery lid.
