5
humantouch.com
4
Head pillow
get
ready
Unpack the box
1. Align the metal tabs on each side of the backrest with the corresponding
slots on the chair base, then push the backrest straight downward firmly
until it clicks into place.
TIP:
Use two people to keep the backrest level
during installation.
2. Pull upward on the backrest to ensure that it is locked into place.
3. Locate the black safety flap on the bottom of the backrest, then attach
it to the seat canvas using the hook-and-loop fasteners.
IMPORTANT:
Be sure to complete this step, as the safety flap
protects against fingers getting pinched.
1. Install the backrest.
Setting up your Human Touch Massage Chair is easy.
Just
attach the backrest pad and the head pillow, and you’re done!
Place the seat cushion into position against
the backrest, then push down firmly to
secure it using the hook-and-loop fasteners.
Zip the head pillow to the backrest.
Connect each of the two cables from the chair base
to the corresponding connectors on the backrest.
2. Install the seat cushion.
3. Install the head pillow.
4. Connect the cables.
Backrest
Safety flap
Seat cushion
Chair Base
Backrest Pad
Seat Pad
Head Pillow
Metal tab
Backrest
ENGLISH
Thread the remote control cable through the
cable guide, to keep it from getting caught
when the chair reclines/inclines.
5. Secure the remote control cable
Control cable
