To experience the full power
of human touch
™
just remove
the massage-softening pad
that comes preinstalled in your
human touch
™
massage chair.
But keep it handy, in case you
want to replace it in the future.
1. Flip the head pillow over the headrest, to the back of the chair.
2. Open the two backrest zips most of the way down the backrest; do not detach the backrest pad from the backrest.
3. Pull the backrest pad outward, then open the zip pocket inside.
4. To install the massage-softening pad:
a. Insert the pad into the zipped pocket and attach the top of it to the pocket using the hook and loop fasteners.
b. Smooth the pad downward until it is flat.
5. To remove the massage-softening pad, detach the hook and loop fasteners at the top of the pad, then carefully remove the pad.
6. Close the zipped pocket and the two backrest zips.
7. Flip the head pillow back over the headrest and push down on the lower corners to secure it.
The massage-softening pad softens the massage intensity. For a stronger massage,
remove the massage-softening pad.
Hook and loop fasteners
customise massage
intensity
Massage-softening pad
www.humantouch.com
12
13
To keep your product working and looking its best, please follow these simple care guidelines
care and
maintenance
Cleaning:
1. Be sure to unplug before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum cleaner.
4. If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the remote control or around the power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.
Maintenance and Repair:
1. The mechanisms of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorised service centre.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power lead be coiled and that the unit be placed in an environment free
of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added safety feature to protect you and this product from
overheating. If the product should suddenly stop and will not start, turn the main power switch, located on the back of the product, to off and do not
operate the product for at least 30 minutes. Failure to turn the product off may result in the product starting unexpectedly when the product cools.
ENGLISH (UK)
