HT-9500/HT-9500X Troubleshooting Guide
5
1. Pull up on the foot and calf massager rotation release handle, then
rotate the foot and calf massager away from the chair until you hear
and feel it lock into place. The smooth side of the foot and calf
massager is now facing up.
2. Pull up on the foot and calf massager rotation release handle, then
rotate the foot and calf massager back toward the chair until you
hear and feel it lock into place.
3. Without pulling the rotation release handle, gently try to rotate the
foot and calf massager away from the chair again. It should be
locked in place, unable to rotate.
4. Reattempt to retract the foot and calf massager.
IMPORTANT
If the rotation release handle unlocks on its own during use,
thus causing repeated problems deploying or retracting the
foot and calf massager, the rotation release handle cable needs
to be adjusted. See the repair instruction, “Adjusting the
Rotation Release Handle.”
5. If the foot and calf massager still collides with the seat when
retracting, remove the seat cushion and then reinstall it, making
sure that the cushion is positioned all the way back against the
backrest.
The foot and calf massager does not retract the last couple
inches:
Due to space limitations the foot and calf massager extends slightly past
the front of the armrests when fully retracted—this is perfectly normal.
The foot and calf massager will not deploy or retract at all:
1. Pull up on the foot and calf massager rotation release handle, then
rotate the foot and calf massager away from the chair until you hear
and feel it lock into place. The smooth side of the foot and calf
massager is now facing up.
2. Pull up on the foot and calf massager rotation release handle, then
rotate the foot and calf massager back toward the chair until you
hear and feel it lock into place.
3. Without pulling the rotation release handle, gently try to rotate the
foot and calf massager away from the chair again. It should be
locked in place, unable to rotate.
