Human Touch acuTouch 9500 Скачать руководство пользователя страница 11

HT-9500/HT-9500X Troubleshooting Guide 

9

Convenience Outlet

NOTE

This section pertains to 120-volt product only; 230-volt 
products do not contain convenience outlets.

The convenience outlet fuse is the right of the two fuses, located on the 
bottom of the power panel. 

1. Verify that the device being plugged into the convenience outlet 

does not draw more than 1 Amp of power. (If it does, it cannot be 
plugged into the convenience outlet as it will blow the fuse).

2. Verify that the device being plugged into the convenience outlet 

works when plugged into a wall outlet.

3. Turn the power switch to OFF and unplug the chair from the wall 

outlet.

4. Using a small screwdriver or a coin, turn the fuse holder (located on 

the power panel) approximately 1/8 turn counter-clockwise. 

The fuse holder pops out.

5. Replace the fuse with a new fuse of the same rating.

6. Reinsert the fuse holder into the power panel, then turn it 1/8 turn 

clockwise to secure it.

7. Plug the chair back into the wall outlet and turn it on.

8. If the convenience outlet is still not receiving power, replace the 

chair base.

Содержание acuTouch 9500













Отзывы: