human care FL180, Руководство пользователя

Страница: 14 / 107

14
www.humancaregroup.com
ASSEMBLY INSTRUCTIONS FL320
11. Remove all the parts from the carton and
place on the floor, taking care to protect
the finish from damage. Lift the lift carefully
from the carton. Stand the lift in the upright
position. See below pictures.
12. Assemble the mast and actuator.
Follow the above steps to open the
lift before installing the actuator.
13. Lay the lift on the floor (ensure the
rear castors are securely locked).
14.
15.
16.
17.
4. Drop the mast assembly upright (using the
top of the push handle), and drop the mast
into the slot, tighten the mast lock knobs,
release the braked castors.
SAFETY NOTE—Avoid trapping fingers.
Keep fingers away from the end of the
mast when inserting into the mast slot.
Tighten the mast-locking device, and
unlock the brakes castors at the rear.
5. Open legs fully. ENSURE leg-locking knob
inserts flush against the base casting and the
legs will no longer moves freely. The legs will
then only operate by the use of foot actuator
located at the rear of the base.
6. Release spreader bar from retaining cradle,
and the lift is ready for operation.
ENSURE the cradle is securely locked. See
picture below.
Assembly FL320
ENG