P R O C E D U R E S
28
SuperCut 100
En011106c_sc100.FM
Procedures
Replacing saw bar
Warning!
Before performing any maintenance or service work,
lower the attachment to the ground and shut off the
engine. Turn off any master shut-offs and do not allow
personnel in the cab.
Important!
When working on the saw chain always ensure the
engine is shut off and wear safety gloves to prevent
injuries. Remove the saw chain when making any
adjustments or servicing the saw unit.
1.
Place the unit steady on the ground with the saw unit
facing up (when possible).
2.
Remove the saw chain.
See Replacing saw chain
3.
Loosen the guide screws (1) and remove the saw bar.
4.
Install a new saw bar and tighten the guide screws (1).
Torque 60 Nm
5.
Install the saw chain.
See Replacing saw chain
1
