Hultafors H3x360G, Руководство по эксплуатации

Страница: 16 / 21

16
• Protect from moisture and humidity. Dry wet or
damp batteries before storage or before use.
• Prior to a prolonged storage, charge the battery
to 80 % capacity
(see Chapter 7 / operation).
Repeat the procedure every 6 months.
• After storage, fully charge the battery before use.
• Check the battery for damage before use.
Do not use damaged batteries!
9.3 Transport
9.3.1 GENERAL
• The device may be damaged by strong
vibrations or by falling.
• Never transport the product loose. Always
use the original packaging or an equivalent
transport container.
• Switch off the measuring device before
transporting it. During the shutdown the
pendulum unit is locked in position and
protected against damage.
• Check the unit for damage before use.
• Regularly check the accuracy of the device
(see Chapter 8 / Checking the accuracy).
9.3.2 BATTERIES
When transporting or shipping batteries, the
operator is responsible for complying with the
applicable national and international laws and
regulations.
• Before shipping, remove the batteries from the
device.
10.1 Product contents H3x360G
H3x360G Cross laser
3.6V Li-ion Batteries (3450mAh)
Power plug
Charger
Quick Starter
Case
10.2 Accessories
RECG Hand-held receiver
B-120 Compact tripod
UH Universal holder
LA-2 Thread adapter set
LBG Laser goggles, green
TPG Magnetic target, green
MAH Magnetic bracket
B-10 Mini tripod
Further information on accessories can be found
at
www.hultafors.com
10. Delivery contents and
accessories