Hultafors H3x360G, Руководство по эксплуатации

Страница: 12 / 21

12
• Recharge the battery regularly or ensure
additional batteries are available.
7.1.2 PULSE MODE
The REC LGD0 receiver can be used to detect
the laser lines at even greater distances or in
unfavorable environmental conditions. Pulse
mode is active on the H3x360G when the MODE
button is pressed. The laser lines flash three
times to indicate the change.
7.1.3 CREATING INCLINATIONS BEYOND THE
RANGE OF AUTOMATIC LEVELLING
ON:
• Push the on/off switch, transport lock to
the left (OFF position).
• Hold down the MODE button for at least
5 seconds.
• To indicate that the self-leveling is switched
off, the lines will blink every 4 seconds.
OFF:
• Hold down the MODE button for at least
5 seconds.
CAUTION
If the laser line is not projected vertically
to the surface or the surface is uneven,
this can lead to erroneous measurement
results.
• Make sure that the laser line is projected
vertically on to the wall or the target surface.
7. Operation
7.1 Getting started
7.1.1 SWITCHING THE INSTRUMENT ON AND OFF
ON:
Push the on/off switch, transport lock to the
right (ON position) and the pendulum unit will
be released. The device emits three 360° lines
from the outlet openings. To turn the vertical
and horizontal 360° lines on and off, press the
H and V buttons. The instrument will level itself
automatically within the specified inclination range
(see Chapter 3/ Technical data).
OFF:
Push the on/off switch, transport lock to the
left (OFF position) and the pendulum unit will be
locked; the laser line will disappear.
NOTE
Magnets can affect the measurement
instrument and lead to false results.
If the vertical laser line is not projected vertically
to the wall or to the target surface, uneven surfaces
can lead to erroneous measurement results.
• Make sure that the vertical laser line is
projected vertically on to the wall or the target
surface.
Severe temperature fluctuations can lead to
erroneous measurement results.
• Before start-up, allow the device to acclimatize
to the ambient conditions.
The laser lines will flash every 30 seconds when
the battery capacity falls below 10%.