Hultafors H3x360G, Руководство по эксплуатации

Страница: 11 / 21

39,7mm
36,13mm
Notes:
Approximate finished size Dimensions (W x H):
Origination software:
File name:
Description:
Last edit:
For products:
Rev:
Adobe Illustrator 2021
Material:
Color specification:
PDF from supplier
(battery_sticker-input_sticker_PRINT.pdf) +
Hultafors logo
Red. Pantone 485C (CMYK 0, 95, 100, 0)
Yellow (CMYK 2, 6, 91, 0)
Black. Pantone Black 6C (CMYK 40, 20, 20, 100)
White. (CMYK 0, 0, 0, 0)
Text
Cutting lines
Folding lines
Information
Explanation line categories (should not be included in print)
Print for label on H3x360G bottom side
FbB-409190.ai
409190
LT 2021-12-17
B0
39,7 x 36,1 mm
11
Labelling on the device:
• Do not remove the type plate!
6. Getting Started
Fully charge the batteries before first use.
The battery charge status is shown on the display.
Charge the batteries when the symbol flashes
continuously on the screen. Use the charger
supplied with your H3x360G.
The device cannot be used whilst charging.
The batteries are fully charged in approx. 3 hours.
6.1 Operation with batteries
1. Open the battery compartment cover.
2. Insert batteries with the correct polarity into
the H3x360G.
3. Close the battery compartment cover (audible
click of the cover).
Only use type 18650 3.6 V Li-ion batteries
(3450 mAh).
Remove the batteries if the instrument is not
used for an extended period.
NOTE
The intensity of the laser lines can vary
depending on the battery quality.