Huler Extreme 850W, Руководство пользователя

Страница: 14 / 22

Charging the battery
1. Plug the XLR cable (connector) into the slot in the frame Huler.
2. Connect the charger DC output cable to XLR cable.
3. Plug the cable into the AC to 220V AC network
• 10Ah SLA Battery - 48V 1Ah charger
• 14Ah SLA Battery - 48V 2A charger
• 10Ah LiFePO4 Battery - 48V 3A charger
• 20Ah LiFePO4 Battery - 48V 6A Charger
For charging, you can only use chargers supplied with batteries.
Remember:
Keep the charger away from children. Never use chargers other than those
that were supplied with batteries. Using high-power chargers can damage
both the battery and charger.
LED2 LED1
LED2 LED1
LED2 LED1
- Connected network 220V: LED1 Red
- Charging in progress: LED2 Red
- Batteries charged: LED2 Green
Charging Identity
Remember:
Charger turns off automatically if the time of 1-3 minutes is not connected
to the battery or when the batteries are charged.