22
Handlebar stem angle adjustment
1. Use a size 6 Allen key to loosen the angle adjustment bolt slightly so that
the handlebars can turn.
2. Turn the handlebar to the desired angle.
3. Tighten the angle adjustment bolt again securely according to the
described tightening torque on page 17.
4.
Adjusting the angle setting
Adjusting handlebar
height and angle
ADVICE FROM RICHARD
Sometimes the stem is very tight and cannot
be moved even when the stem bolt is unscrewed. Take a plastic
hammer and hit the stem bolt once. This will shoot down slightly, after
which the handlebar will be loose.
Setting the switch stem
1. Slide the locking tab upwards.
2. Pull the lever upwards.
3. Place the handlebar in the desired position.
4. Press the locking tab closed again.
set switch handlebar stem
Adjusting height
