21
Setting the steering angle
A good posture also depends on the correct handlebar height. The handlebar
height, handlebar angle and angle setting of the stem and handlebars can be
adjusted for this.
All fixing bolts must be tightened securely after setting the correct
seat and steering positions. Failure to do so can be dangerous. It
prevents the seat from moving suddenly.
Setting the handlebar height
1. Use a size 6 Allen key to loosen the stem bolt slightly so that the
handlebars can move.
2. Pull or push the handlebar to the desired height. Make sure that the stem
remains in the frame enough, so that the safety marking is not visible.
3. Tighten the stem bolt securely according to the specified torque on page 19.
Multi adjustable stem, height setting
1.
Use a size 6 Allen key to loosen the stem bolt slightly so that the handlebars
can move.
2.
Pull or push the handlebar to the desired height. Make sure that
3.
Make sure that the stem remains in the frame
enough, so that the safety
4.
the safety marking ''MIN'' is not visible.
5.
Tighten the stem bolt again securely according to the
specified torque on page 19.
1. Using a size 6 Allen wrench, loosen the handlebar bolt slightly to allow
the handlebar to rotate.
2. Turn the handlebar to the desired position.
3. Tighten the handlebar bolt securely again according to the described
tightening torque on page 19.
www.huka.nl/en
