20
Optimal use
Upon delivery of your new Huka, the parts have been adjusted to your body and
to your wishes. To make sure you are comfortable, there are adjustment
possibilities for the seat system and handlebars.
Setting the seat depth
1. Remove the protective caps.
2. Loosen the 3 M8 bolts on both sides of the bike
slightly using an Allen key.
3. Place the seat in the correct position.
4. Tighten the 3 bolts on both sides of the bike.
ADVICE FROM RICHARD
A good rule of thumb for the adjustment of
the seat is to sit on the bike without shoes with the crank in line with the
seat frame. With your heel on the pedal, you should barely be able to
extend your leg. From this position, you can adjust the depth of the seat
to the most comfortable position for you.
The height of the seat changes automatically when the seat depth is adjusted,
because the mounting tube runs diagonally upwards. When the seat depth is
adjusted correctly, the seat height will automatically be right. With the seat in
the right position, you will effortlessly pedal away the kilometres.
1.
Using an Allen wrench and a size 13 socket wrench,
disassemble the 2 bolts.
2.
Tilt the seat to the correct position in terms of its setting
and secure it again with the bolts on the adjustment
strips with the fixing holes.
3.
Refit the bolts and tighten firmly.
Setting the seat angle & height
The seat angle is individually adjustable and partly influences
the creation of a good sitting position.
